How Big Should My Dining Table Be For A Family Of 5?

0 Comments

How big of a dining table should I get?

The ideal four-seater square dining table size is around 43 inches (3ft; 107cm). Similar to a round table, the minimum dining table size can be as low as 36 inches (3ft; 91cm), although you should allow more room – up to 50 inches (4ft; 122cm) – for a better fit and if you have wide table legs.

What size is a 6 person dining table?

Choosing the Right Dining Table Size

Size (Diameter): Oval & Rectangular Will Comfortably Seat: Round & Square Will Comfortably Seat:
4 feet (48 inches) 4 people 4 people
5 feet (60 inches) 6 people 6 people
6 feet (72 inches) 6 people 6 people
8 feet (96 inches) 8 people Not a typical size

How big of a table can I fit?

Comfortable seating should allow 24 to 28 inches of table edge per seat. For example, a rectangular table 36 to 42 inches wide and 6 feet long can seat six to eight. Round tables up to 60 inches can seat four — or six if the larger table has a pedestal base.

You might be interested:  Often asked: What Is The Cheapest Meal For A Large Family?

Is 30 inches wide enough for a dining table?

Generally, 30 inches is the minimum comfortable width for a dining table.

How much should a dining table cost?

The amount you will pay for a dining room table depends on a variety of factors, such as size, material, design, and shape. Costs can range from $150 (if you buy it used) to more than $1500 depending on its model, material, place of purchase, and the number of chairs it comes with.

What shape table is best for small area?

A round table works well in small rooms and smaller square shaped rooms. It creates a cozy and intimate setting, so it’s the best shape for a small group of people. A large round table, however, can make guests feel very far away from each other.

How long is a rectangle table that seats 6?

For Rectangular Tables: Most people find that a 6 foot long (72 inch) dining table is perfect for seating 6 comfortably.

How long is a table that seats 6?

To seat four to six people, look for a table that is at least 60″ long. For six to eight guests, your table should be at least 78″ long. The rule of thumb is to allow 24″ of space per seat at your dining table.

What is the narrowest A dining table can be?

Thirty-six-inches is the most narrow that you can usually find a traditional dining table. This allows for 18-inches of space for each opposite-facing guest and permits some room in the middle for serving dishes or platters.

Do round or rectangular tables take up more space?

In most cases the answer is yes because a round table offers the same usable table space with less of a footprint compared to rectangular tables of equal size. Take away the annoying corners and the fact that people are not sitting shoulder to shoulder and you have in a round table a better fit for the available space.

You might be interested:  Cat Family Large Size What Is It?

What size table fits in a 10×10 room?

There is adequate space for seating and a walkway behind the diners with a clearance of 36 to 42 inches from table edge to a wall or other furniture. A table 36 to 42 inches wide and 60 to 72 inches long can be accommodated in a dining room.

How many can you seat at a 8 foot rectangular table?

When figuring out seating you want to plan on about 2 feet for each person. With this in mind an 8 foot banquet table will comfortably be able to hold 8 people ( 4 people on each side). You may also be able to squeeze an additional 2 people by putting a seat at each end of the table.

What is standard dining table width?

Most dining tables are made according to standard measurements. The standard width is 36-40 inches while standard height is 29-31 inches.

How many chairs can fit around a 30 inch table?

How Many People Can Sit at a 6 Foot Table? If you have a 6 foot round table (72 inches ), you can seat 8-10 people at the table. If it is a 30 inch by 72 inch rectangular table, 6-8 seats will fit around the table, with 3 chairs on either side and 1 chair at either end.

Where should legs be placed on a dining table?

For dining tables, position your legs 16-20” from the end of the table to allow for seating someone on the end. Mark all of your mounting holes with the legs in place. Remove legs and drill holes for threaded inserts.

Leave a Reply

Your email address will not be published. Required fields are marked *

Related Post